產品特點：上海軒頊瑞士魯格RUEGER溫度變送器將熱電阻、基于熱電阻的傳感器、熱電偶或mV 信號轉換成獨立于負載的與傳感器特性相對應的電流信號。 由于緊湊型產品的設計，變送器可安裝在B 型(DIN 43 729) 中（2 區）接線盒中或比更大的接線盒中。

瑞士魯格RUEGER溫度變送器S95的詳細資料：

上海軒頊供應瑞士魯格RUEGER雙金屬溫度計,瑞士魯格RUEGER壓力式溫度計,瑞士魯格RUEGER熱電偶/熱電阻,瑞士魯格RUEGER壓力表,瑞士魯格RUEGER溫度變送器......

RUEGER S.A.成立于1942年，總部位于Crissier （Lausanne），主要為客戶提供溫度和壓力測量裝置。如今公司在擁有170多位雇員。該產品應用范圍廣泛，例如：食品、醫藥、化學、通風設施及工業等等。

S95.3 變送器將熱電阻、基于熱電阻的傳感器、熱電偶或mV 信號轉換成獨立于負載的與傳感器特性相對應的電流信號。由于緊湊型產品的設計，變送器可安裝在B 型（DIN 43 729） 中（2 區）接線盒中或比更大的接線盒中。S95.3 變送器采用HART 協議 V5.7 通訊協議，或手持式HART 通訊編程器對S95.3 變送器進行組態。

Description

S95.3C01 / S95.3C11 is a 4...20 mA loop-powered transmitter for Pt100

sensors.

Either 2-, 3- or 4-wire sensors can be used. For 2-wire sensors an automatic

balancing of the sensor cable resistance is possible with shorted sensor

cable. The cable resistance can be manually configured as well.

Using a PC, the Windows-based Flex-program and a FlexProgrammer

configuring unit, the following parameters can be configured via the output

connectors （2-way communication）: TAG no., number of wires, cable resistance,

error detection level, measuring range/unit, damping, offset and status

indication.

The Flex-program has a datalogging facility enabling the user to monitor

measuring results or calibrate the measuring setup.

S95.3C01 / S95.3C11 is embedded in silicone which makes it resistant to

humid environments.

S95.3C01 / S95.3C11, fitting into the DIN B housing, has a 6 mm center hole

for quick sensor replacement. The spring loaded mounting screws ensure a

safe fastening even in vibrating environments.