廣泛應用： 生物制劑、制藥、扣電、水劑等液體的精密定量灌裝。Precise quantity filling of liquids such as biological agents, pharmaceuticals, button cells, bactericides, etc.
產品性能：
l 結構緊湊、體積小、高精度、耐腐蝕、耐高溫。
l 拆卸安裝方便，可在線清洗，通過閥向正反切換實現。
l 可負壓、高溫、蒸汽滅菌。
l 雙軸步進馬達驅動、高性能、長壽命，高強度可重復運行。
l 精密陶瓷閥往復旋轉運行，計量大小通過調節沖程長度。
l 無動態密封件，無易損件，零維修及保養成本。
l 防化學反應與大多數流體都兼容。
l 跟液體接觸材質Al2O3、SUS316L、PTFE.（可指定材質）
l Compact structure, small size, high precision, corrosion resistance and high temperature resistance.
l Easy to disassemble and install and can be cleaned online by switching the valve to the forward and reverse directions.
l It can be sterilized by negative pressure, high temperature and steam.
l Dual axis stepper motor drive, high performance, long service life, high strength and repeatable operation.
l The precision ceramic valve rotates reciprocally, and the measurement size is adjusted by the stroke length.
l No dynamic seal, no quick-wear parts, zero maintenance and repair costs.
l Anti-chemical reaction prevention is compatible with most fluids.
l Materials contacting liquid: Al2O3, SUS316L and PTFE. (Material can be specified)
技術參數 Technical Parameters
規格型號 Specification and Model | JKR-SWL-A50µL | JKR-SWL-A100µL |
泵閥材質 Pump valve material | 氧化鋁Alumina/氧化鋯zirconia/氮化硅 silicon nitride(可選optional) | |
泵套材質 Pump casing material | SUS304/316/6061(可選optional) | |
接觸液體材質 Contact liquid material | 陶瓷Ceramic,SUS316L,PTFE(可選optional) | |
驅動方式 Driving mode | 雙軸步進電機Dual axis stepper motor | |
調量方式 Modulation mode | 精密螺桿調節Precision screw adjustment | |
單沖程計量范圍 Flow selection/each time | 5-50µL | 30-100µL |
沖程精度 Single stroke metering range | ±0.5‰ | ±0.5‰ |
沖程轉速 Stroke accuracy | 18-180r/min | 18-180r/min |
出口壓力 Stroke speed | Max0.15Mpa | Max0.15Mpa |
導液管道 Outlet pressure | Φ1.0×1.6mm | Φ1.0×1.6mm |
導管材質 Liquid guide pipe | PTFE/PE | |
通訊接口 Conduit material | RS232(485optional),I/O,CC TRIG,AUX OUT | |
配制電源 Communication interface | 220V/50HZA或120V/60HZ(optional） | |
工作環境 Power supply(can be specified) | Use temperature and humidity 5-40 ℃, below 85% RH | |
泵體尺寸 Working environment | 215×65×99mm | |
控制器尺寸 Pump body size | 200×200×130mm | |
泵體重量 Controller size | About 0.6kg | |
